You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP 1U 9-Bay NAS, Intel® Core™ i3-8100 4-core 3.6 GHz Processor, 4 GB UDIMM DDR4 (1 x 4GB), 5 x 2.5"/3.5" SATA HDD/SSD and 4 x 2.5" SATA SSD, 2 GigaLan, 2 x 10GbE SFP+ SmartNIC, 300W redundant power supply.
TVS-972XU-i3-4G | |
---|---|
CPU | Intel® Core™ i3-8100 4-core 3.6 GHz processor Architecture: 64-bit Graphics: Intel® UHD Graphics 630 |
Encryption Acceleration | , AES-NI |
System Memory | 4 GB UDIMM DDR4 (1 x 4 GB) |
Maximum Memory | 64 GB ( 4 x 16 GB) |
Memory Slot | 4 x Long-DIMM DDR4 (For dual- or quad-DIMM configurations, you must use a pair of identical DDR4 modules.) |
Flash Memory | 4 GB (Dual boot OS protection) |
Drive Bay | 4 x 3.5-inch SATA 6 Gbps bays 5 x 2.5-inch SATA 6 Gbps bays Hot-swappable |
Drive Compatibility | 3.5-inch bays: .3.5-inch SATA hard disk drives .2.5-inch SATA hard disk drives .2.5-inch SATA solid state drives 2.5-inch bays: .2.5-inch SATA solid state drives |
10 Gigabit Ethernet Port | 2 x 10GbE SFP+ SmartNIC ports |
Gigabit Ethernet Port | 2 x RJ45 |
PCIe Slot | 1 x Gen3 x16 |
USB Port | 2 x USB 3.0 2 x Type-C USB 3.1 Gen2 10Gbps 2 x Type-A USB 3.1 Gen2 10Gbps |
HDMI Output | 1 x HDMI 2.0, up to 3840 x 2160, @60Hz |
LED Indicators | HDD 1-4, SSD 1-5, Status, LAN |
Buttons | Power, Reset |
System Warning | Voice prompts |
Form Factor | 1U Rackmount |
Dimensions (H x W x D) | 43.3 x 482.6 x 484.15 mm 1.7 x 19 x 19.1 inch |
Weight | Net weight: 7.48 kg (16.46 lbs) Gross Weight: 10.27 kg (22.59 lbs) |
Power Supply Unit | 250W, 100-240V |
Power Consumption (W) | In operation: 72.17 W (with WD10EFRX drives fully populated) |
Fan | System: 3 x 4.0cm fan (12V DC) |
Sound Level | Sound pressure (LpAm): 44.1 dB(A) |
Operating Temperature & Relative Humidity | 0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Security Slot | Kensington Security Slot |
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.