You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP TVS-682-i3-8G Diskless, Intel Core i3-7100 3.9 GHz dual-core, 8GB DDR4 RAM (4 GB x 2), 4 x 1GbE RJ-45, 1xHDMI 2.0 for 4K 60fps, tiered storage, application-based partitioning.
|CPU||Intel® Core™ i3-7100 3.9 GHz dual-core processor|
|System Memory||Total DIMM slots: 4
Maximum memory: 64 GB (16 GB x4)
Memory modules pre-installed: 8 GB DDR4 RAM (4 GB x 2)
Note: The pre-installed memory modules need to be replaced when expanding the memory to over 24 GB.
|Flash Memory||512MB DOM|
|M.2 SSD Slot||2 x M.2 2242/2260/2280/22110 SATA 6Gb/s SSD
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
|Drive Bay||2 x 2.5” SSD, max 9.5mm drive height
4 x 2.5”/3.5” hard drive or SSD
|Drive Compatibility||SATA 6Gbps/3Gbps; Hot-swappable|
|USB Port||1 x USB 3.0 port (Front)
4 x USB 3.0 port (Rear)
|Gigabit Ethernet Port||4 x GbE port (10GbE and 40GbE are supported with the purchase and installation of compatible network adapters)
1. For a list of compatible network adapters, please visit the Compatibility List.
2. For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual.
|Audio||Input: 2 x 6.3mm MIC In
Output: 2 x built-in speaker, 1 x 3.5mm Line-out jack
Note: Only one of the above audio output ports can work at a time. If a speaker is connected, the sound will output through the speaker.
|LED Indicators||System status, 2.5” SSD, M.2 SSD, 3.5” HDD|
|Buttons||System: Power button, Reset button, USB one-touch-backup button|
|Dimensions (H x W x D)||231.9 (H) x 224.9 (W) x 319.8 (D) mm
9.1 (H) x 8.9 (W) x 12.6 (D) inch
|Weight||Net (NAS only): 7.7 kg
Gross (with packing and accessories): 9.21 kg
|Sound Level||Sound pressure (LpAm) (bystander position): 20.5 dB
(with 4 x Seagate ST2000VN000-1HJ164 hard drive installed)
|Operating Temperature & Relative Humidity||0-40˚C
5~95% non-condensing, wet bulb: 27˚C
|Power Supply Unit||Input: 100-240V~, 3-1.5A, 60-50Hz; Output: 250W|
|PCIe Slot||2 (1* PCIe Gen3 x16; 1* PCIe Gen3 x4)|
|Fan||System: 1 x 8 cm cooling fan
CPU: 1 x 9 cm fan
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.