QNAP TVS-672XT-i3-16G RAM upgrade 6 Bay Diskless NAS

~~$2,203.00~~

$2,013.00

Lead time is 5 days for this product

QNAP TVS-672XT-i3-16G Diskless, Intel Core i3-8100T 4-core 3.1 GHz Processor, 16GB DDR4 RAM (max 32GB), 6x 2.5"/3.5" SATA HDD/SSD + 2x M.2 PCIe SSD slot, 2xGbE LAN, 1 x 10GBase-T, 2 x Thunderbolt 3 port, 4x USB 3.1 Gen 2 type-C & type-A, USB. 3.0, LCD, 2x PCIe expansion slot, 250W single power supply, 1x MIC In, 1x Line Out

Processor: Intel Core i3-8100T 4-core 3.1 GHz Processor
System Memory: 16GB DDR4 RAM
Maximum Memory: 32GB DDR4 RAM
10 Gigabit Ethernet Port: 1 x 10GBase-T
Gigabit Ethernet Port: 2 x GbE LAN
Drive Compatibility: 3.5-inch or 2.5-inch SATA hard drive or 2.5-inch SATA SSD
RAID: RAID 50/60 is recommended for NAS with over 6 disks to strike a balance between capacity, protection, and performance

Intel CPU

16G DDR4 Memory

SATA Hard Drive

SATA Solid State Drive

2 PCIe

6 Drive Bays Drive Bays

6 Drives

Availability: Out Of Stock

Sku: TVS-672XT-i3-16G

Need Financing? Click here

Description
Specifications
Reviews
QM2 Technology
Qbit Service

Product Highlights

Ine 10GbBase-T port provide higher bandwidth to empower applications like virtualization, 4K video editing and file sharing.
PCIe expandability allows for installing 10GbE adapters, PCIe NVMe SSD, graphics cards, USB 3.1 Gen 2 (10Gbps) cards, or wireless network cards.
Supports AMD Radeon™ and NVIDIA® graphics cards for video processing or GPU-passthrough to VMs.
Qtier™ technology and SSD caching enable 24/7 optimized storage efficiency.
Scalable storage supporting virtualization, containerized apps, centralized storage, backup, sharing, and disaster recovery.
RAID 50/60 is recommended for NAS with over 6 disks to strike a balance between capacity, protection, and performance

TVS-672XT-i3-16G

CPU	Intel® Core™ i3-8100T 4-core 3.1 GHz Processor
CPU Architecture	64-bit x86
Graphic Processors	Intel® UHD Graphics 630
Floating Point Unit
Encryption Engine	(AES-NI)
Hardware-accelerated Transcoding
System Memory	16 GB SODIMM DDR4 (2 x 8 GB)
Maximum Memory	32 GB ( 2 x 16 GB)
Memory Slot	2 x SO-DIMM DDR4
Flash Memory	4GB (Dual boot OS protection)
Drive Bay	6 x 3.5-inch
Drive Compatibility	3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives
Hot-swappable
M.2 SSD Slot	2 x M.2 2280 PCIe Gen3 x2 slots
SSD Cache Acceleration Support
Gigabit Ethernet Port (RJ45)	2
10 Gigabit Ethernet Port	1 x 10GBASE-T (10G/5G/2.5G/1G/100M)
Jumbo Frame
Thunderbolt Port	2
PCIe Slot	2 Slot 1: PCIe Gen3 x16 (CPU) Slot 2: PCIe Gen3 x4 (PCH) Slot 1 is preinstalled with a Thunderbolt 3 adapter
USB 3.0 port	1
USB 3.1 Gen 2 (10Gbps) Port	2 x Type-C USB 3.1 Gen2 5V/3A 10Gbps 2 x Type-A USB 3.1 Gen2 5V/1A 10Gbps
IR Sensor	(QNAP RM-IR004 & MCE)
HDMI Output	1, HDMI 2.0 (up to 3840 x 2160 @ 60Hz)
Audio Input	1 x 3.5mm microphone input jacks
Audio Output	speaker, 3.5mm line out jack
Form Factor	Tower
LED Indicators	HDD 1-6, Status, LAN, USB port, M.2 port
LCD Display/ Button
Buttons	Power, Reset, USB Copy
Dimensions (HxWxD)	188.2 × 264.3 × 279.6 mm
Weight (Net)	6.553 kg
Weight (Gross)	8.07 kg
Operating temperature	0 - 40 °C (32°F - 104°F)
Relative Humidity	5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit	250W, 100-240V
Power Consumption: HDD Sleep Mode	26.52 W
Power Consumption: Operating Mode, Typical	45.6 W With WD10EFRX drives fully populated
Fan	System: 2 x 9.2cm fan (12V DC) CPU: 2 x 6cm blower fan
Sound Level	23.8 db(A)
System Warning	Voice prompts or Buzzer
Kensington Security Slot

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
* Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS.
Designs and specifications are subject to change without notice.

QM2 - Upgrade your QNAP NAS Experience with M.2 SSD Caching and 10G in One Card

QM2 is designed specifically to upgrade your entry and mid-end QNAP NAS system! QNAP puts 2 M.2 SSD slots (SATA or PCIe NVMe) and one 10GBase-T network port into a single PCIe expansion card. Installed M.2 SSD sticks are covered by a giant heatsink as well as a smart fan for heat dissipation which ensure operational stability and longevity. With this PCIe expansion card, you can enable SSD Caching or auto tiering while populate all your NAS bays with high capacity HDD!

Application for QM2 SSD slots:

Create a volume on these SSD and use them as extra storage
Enable Read Cache
Enable Read/Write Cache
Enable Qtier feature
Boost performance in case of memory swapping

What is Qbit?

Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.

Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.

Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.