You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP Desktop 6-bay NAS/iSCSI IP-SAN, Intel® CoffeeLake Core™ i5-8400T 6-Core 1.7 GHz (max 3.3), 8GB DDR4 RAM, 10GbE*1 (BASE-T), 1GbE*2
Powered by an Intel® Core™ i3 processor, the high-performance TVS-672X NAS features built-in 10GbE connectivity for boosted virtualization performance and streamlined backup and application workflows from multiple workstations. The TVS-672X also supports M.2 NVMe SSDs for cache acceleration, PCIe expansion, multi-cloud backup, 4K HDMI 2.0 output and real-time transcoding, alongside expandable storage capacity and feature-rich apps to perform as a cost-efficient, reliable, and multifunctional NAS solution.
CPU | Intel® CoffeeLake Core™ i5-8400T 6-core 3.1 GHz Processor |
CPU Architecture | 64-bit x86 |
Graphic Processors | Intel® UHD Graphics 630 |
Floating Point Unit |
|
Encryption Engine | (AES-NI) |
Hardware-accelerated Transcoding |
|
System Memory | 8 GB SODIMM DDR4 (1 x 8 GB) |
Maximum Memory | 64 GB ( 2 x 32 GB) |
Memory Slot | 2 x SO-DIMM DDR4 |
Flash Memory | 5GB (Dual boot OS protection) |
Drive Bay | 6 x 3.5-inch SATA 6Gb/s, 3Gb/s |
Drive Compatibility | 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Hot-swappable |
|
M.2 SSD Slot | 2 x M.2 2280 PCIe Gen3 x2 slots |
SSD Cache Acceleration Support |
|
Gigabit Ethernet Port (RJ45) | 2 |
10 Gigabit Ethernet Port | 1 x 10GBASE-T (10G/5G/2.5G/1G/100M) |
Wake on LAN (WOL) |
|
Jumbo Frame |
|
PCIe Slot | 2 Slot 1: PCIe Gen 3 x16 (CPU) Slot 2: PCIe Gen 3 x4 (PCH) |
USB 3.2 Gen 1 port | 1 |
USB 3.2 Gen 2 (10Gbps) Port | 2 x Type-C USB 3.2 Gen 2 10Gbps 2 x Type-A USB 3.2 Gen 2 10Gbps |
IR Sensor | (QNAP RM-IR004 & MCE) |
HDMI Output | 1, HDMI 2.0 (up to 3840 x 2160 @ 60Hz) |
Form Factor | Tower |
LED Indicators | HDD 1-6, Status, LAN, USB port, M.2 port |
LCD Display/ Button |
|
Buttons | Power, Reset, USB Copy |
Dimensions (HxWxD) | 188.2 × 264.3 × 279.6 mm |
Weight (Net) | 6.553 kg |
Weight (Gross) | 8.07 kg |
Operating temperature | 0 - 40 °C (32°F - 104°F) |
Storage Temperature | -20 - 70°C (-4°F - 158°F) |
Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | 250W, 100-240V |
Power Consumption: HDD Sleep Mode | 26.52 W |
Power Consumption: Operating Mode, Typical | 45.6 W
Tested fully populated with WD10EFRX hard drives.
|
Fan | System fan: 1 x 120mm, 12VDC CPU fan: 2 x 60mm blower fan |
Sound Level | 23.8 db(A) |
System Warning | Voice prompts or Buzzer |
Kensington Security Slot |
|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.