You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
Expected availability: no current ETA
IMPORTANT NOTICE:
This item is noncancelable and nonreturnable.
QNAP TVS-473e-16G Diskless, AMD R-Series RX-421BD quad-core 2.1 GHz processor, burst up to 3.4 GHz, 16GB DDR4(expandable to 16GB),High-performance 10GbE-enabled business NAS with powerful quad-core AMD R-Series APU
The TVS-473e is powered by a high-end AMD R-Series APU that incorporates an exceptional CPU with AMD Radeon™ R7 Graphics performance, delivering a high-performance and energy-efficient NAS solution. Built with a state-of-the-art metal design and topped off with a stylish gold finish, the highly-capable TVS-473e provides PCIe expandability, the unique USB QuickAccess port, HDMI 4K@ 30Hz output, and 4K H.264 video decoding and encoding acceleration for an optimum audiovisual experience.
TVS-473e-16G | |
---|---|
CPU | AMD R-Series RX-421BD quad-core 2.1 GHz processor (Turbo Core to 3.4GHz) |
CPU Architecture | 64-bit x86 |
Graphic Processors | Embedded Radeon™ R7 Graphics Processor |
Floating Point Unit | |
Encryption Engine | (AES-NI) |
Hardware-accelerated Transcoding | |
System Memory | 16 GB SO-DIMM DDR4 (4 x 4 GB) |
Maximum Memory | 64 GB (4 x 16 GB) |
Memory Slot | 4 x SO-DIMM DDR4
For dual- or quad-DIMM configurations, you must use a pair of identical DDR4 modules.
|
Flash Memory | 512 MB (Dual boot OS protection) |
Drive Bay | 4 x 3.5-inch SATA 6Gb/s, 3Gb/s |
Drive Compatibility | 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Hot-swappable |
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
|
M.2 SSD Slot | 2 x M.2 2280/2260 SATA 6Gb/s slots
The M.2 SSD is not included as standard.
M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD. |
SSD Cache Acceleration Support | |
Gigabit Ethernet Port (RJ45) | 4
Expandable with an optional PCIe adapter
|
10 Gigabit/ 5 Gigabit Ethernet Port | Optional via a PCIe adapter |
Jumbo Frame | |
PCIe Slot | 2 Slot 1: PCIe Gen3 x4 Slot 2: PCIe Gen3 x4 |
USB 3.0 port | 4 |
USB 3.1 Gen 2 (10Gbps) Port | Optional via a PCIe adapter |
USB QuickAccess | 1 x USB 3.0 Micro-B |
IR Sensor | (QNAP RM-IR004) |
HDMI Output | 2, HDMI 1.4b (up to 3840 x 2160 @ 30Hz) |
Audio Input | 2 x 3.5mm dynamic microphone input jacks |
Audio Output | 1 x built-in speaker, 1 x 3.5mm line out jack (for ampfliers or speakers)
You cannot use the speakers and the line-out jack simultaneously.
|
Form Factor | Tower |
LED Indicators | Status/Power, USB, LAN, Drive 1-4, M.2 SSD 1-2 |
LCD Display/ Button | |
Buttons | Power, Reset, USB Auto Copy |
Dimensions (HxWxD) | 7.41 × 7.85 × 11.01 inch |
Weight (Net) | 10.8 lbs |
Weight (Gross) | 13.34 lbs |
Operating temperature | 0 - 40 °C (32°F - 104°F) |
Relative Humidity | 5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | 250W, 100-240V AC, 50-60Hz, 3.5A |
Power Consumption: HDD Sleep Mode | 33.24 W |
Power Consumption: Operating Mode, Typical | 56.23 W
With 4 x 2TB HDDs installed
|
Fan | System: 1 x 120 mm CPU: 1 x 60 mm |
Sound Level | 21.7 db(A) |
Kensington Security Slot |
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.