$1,785.00

Shipping from Stock now 

QNAP Desktop 4-bay NAS/iSCSI IP-SAN, AMD Ryzen V1000 series V1500B 4C/8T 2.2 GHz, 8GB RAM, two 2.5GbE, 10G-ready

AMD Ryzen V1000 series V1500B 4C/8T 2.2GHz, 8GB DDR4 RAM (2 x SODIMM slots, max. 64GB, optional ECC RAM support), 2x M.2 NVMe PCIe Gen3 SSD slots, 2 x 2.5GbE LAN, optional 10GbE expansion via a PCIe, 2 x PCIe 3.0 x 4 slots, USB 3.2 Gen2 Type-C & Type-A; integrated w/ 3 x 16TB Seagate Enterprise ST16000NM001G or ST16000NM000J.

Product Features

  • Processor: AMD Ryzen™ Embedded V1500B quad-core 2.2 GHz processor
  • System Memory: 8 GB SO-DIMM DDR4 (1 x 8 GB)
  • Maximum Memory: 64 GB (2 x 32 GB)
  • 10 Gigabit Ethernet Port: Optional via a PCIe adapter
  • 2.5 Gigabit Ethernet Port (2.5G/1G/100M): 2
  • 5 Gigabit Ethernet Port (5G/2.5G/1G/100M): Optional via a PCIe adapter
  • Drive Compatibility: 3.5-inch SATA hard disk drives, 2.5-inch SATA hard disk drives, 2.5-inch SATA solid state drives
  • PCIe Slot:2 Slot 1: PCIe Gen 3 x4, Slot 2: PCIe Gen 3 x4
AMD Ryzen™ CPU
8G DDR4 Memory
SATA 3/6Gb/s Hard Drive
SATA 3/6Gb/s Solid State Drive
2 M.2 SSD
 4 Drive Bays Drive Bays
 4 Drives
 4 Drives
Availability: Many In Stock
Sku: TS-473A-8G-48ESJ

QNAP TS-473A 48TB integrated w/ 3 x 16TB Enterprise Drvies 4-bay Desktop NAS/iSCSI IP-SAN, AMD Ryzen V1000 series V1500B 4C/8T 2.2 GHz, Tested ready to use out of the Box

What does this include:

Main System:

QNAP TS-473A 48TB integrated w/ 3 x 16TB Seagate Enterprise ST16000NM001G or ST16000NM000J 4-bay Desktop NAS/iSCSI IP-SAN, AMD Ryzen V1000 series V1500B 4C/8T 2.2 GHz, Tested ready to use out of the Box

HDD Drives:

3 x Award Winning 16TB with Gross capacity of 48 Terabytes (TB) of raw capacity, and 5 years warranty directly with manufacturer.

Configuration:

NASBIT service at no extra charge – we install the drives, configure with RAID and burn test the system for 24-48hrs and then the final Q&A, double pack system for protection against damages in shipping and you are ready to use the NAS out of the box.

Featuring an AMD Ryzen™ V1000 series V1500B quad-core processor that delivers great system performance with up to quad-core / 8 threads and Turbo Core up to 2.2 GHz. The TS-473A features two 2.5GbE RJ45 ports and two PCIe Gen 3 slots for you to flexibly deploy 5GbE/10GbE networks. Two M.2 NVMe SSD slots for Qtier Technology and SSD Caching enable constant storage optimization. The TS-473A supports QTS and QuTS hero, allowing users to flexibly switch operating system based on their requirements.

Both 2.5GbE ports are backwards compatible with 1GbE/ 100MbE speeds. Up to 5 Gbps transfer speeds can be achieved by using port trunking.

Add extra functionality with PCIe cards, including 10GbE ports, SSD caching, extra USB 3.2 Gen 2 ports, wireless networking, or Fibre Channel.

Supports entry-level NVIDIA® graphics cards for video processing or GPU-passthrough to VMs.

Features two M.2 PCIe NVMe SSD slots for Qtier Technology and SSD Caching enable constant storage optimization.

Host containerized applications and virtual machines with various operating systems.

Features QTS operating system and supports switching to ZFS-based QuTS hero for greater reliability.

High performance AMD Ryzen™ processor

The TS-473A is powered by an AMD Ryzen™ V1000 series V1500 quad-core 2.2 GHz processor with up to 64GB RAM (ECC memory is supported*) and features USB 3.2 Gen 2 ports for speeds up to 10 Gb/s. The TS-473A also provides one USB Type-C port for supporting more devices to transfer large media files across devices, providing you with a more efficient workflow.

Transform your network with a wallet-friendly 2.5GbE switch

Upgrading your network shouldn’t break the bank, and 2.5GbE connectivity provides immediately noticeable improvements compared to standard 1GbE. QNAP offers 2.5GbE switches that supports Multi-Gigabit NBASE-T™ and allows you to use existing CAT5e cables to connect multiple computers and NAS, assisting organizations in implementing high-speed, secure and scalable network environments without going over budget.

Switch operating systems for optimal data integrity and reliability

The TS-473A also supports QuTS hero - QNAP’s ZFS-based NAS operating system. Providing end-to-end data integrity, data reduction (inline data deduplication, compression and compaction), and much more, QuTS hero uses additional system resources to ensure an optimal environment for protecting business data.

Note: 1. QTS and QuTS hero use different file systems. You must remove all the drives from the TS-473A before switching from QuTS hero to QTS. 2. QuTS hero requires a NAS with at least 8 GB memory. 3. Inline Data Deduplication requires a NAS with at least 16 GB memory (at least 32 GB memory is recommended for optimal performance). 4. It is recommended to create an SSD RAID with at least two SSDs for the QuTS hero system drive to attain optimal system performance. Please note that M.2 SSD hot-swapping is only supported by M.2 SSD slots on PCIe cards (such as the QM2). M.2 SSD slots that are built into the NAS do not support hot-swapping.

Obtain performance benefits from M.2 SSD caching

The TS-473A features 2 M.2 NVMe SSD slots for you to enjoy SSD caching or Qtier auto tiering Technology

Improve random data access speeds with an SSD cache

SSD caches accelerate IOPS performance and reduce latency for storage volumes. They are perfect for IOPS-demanding applications (including databases and virtualization) and can significantly improve overall workflows.

Maximize the value of SSDs with Qtier Technology

Qtier™ Technology empowers the TS-473A with auto tiering that helps continuously optimize storage efficiency by automatically moving data between M.2 SSDs, 2.5-inch SSDs, and high-capacity HDDs based on the data's access frequency. Qtier™ 2.0 features IO-awareness that empowers SSD-tiered storage with a cache-like reserved space to handle burst I/O in real time, greatly maximizing the advantages of SSDs.

Note: Qtier Technology is supported by QTS

Upgrade to 10GbE and abundant capability with PCIe expansion

The TS-473A features two PCIe Gen 3 x4 slots that allows for various expansion cards for expanding application potential./p>

Note: TS-473A uses high-profile expansion cards

TS-473A-8G

CPU AMD Ryzen™ Embedded V1500B quad-core 2.2 GHz processor
CPU Architecture 64-bit x86
Graphic Processors Optional via a PCIe adapter
Floating Point Unit
Encryption Engine (AES-NI)
Hardware-accelerated Transcoding Optional via a PCIe adapter
System Memory 8 GB SO-DIMM DDR4 (1 x 8 GB)
Maximum Memory 64 GB (2 x 32 GB)
Memory Slot 2 x SO-DIMM DDR4
Support ECC memory

For dual-DIMM configurations, you must use a pair of identical DDR4 modules.

Flash Memory 5GB (Dual boot OS protection)
Drive Bay 4 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable

The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.

M.2 SSD Slot 2 x M.2 2280 PCIe Gen3 x1 slots

The M.2 SSD is not included as standard. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.

SSD Cache Acceleration Support
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 2
5 Gigabit Ethernet Port (5G/2.5G/1G/100M) Optional via a PCIe adapter
10 Gigabit Ethernet Port Optional via a PCIe adapter
Wake on LAN (WOL)
Jumbo Frame
PCIe Slot 2
Slot 1: PCIe Gen 3 x4
Slot 2: PCIe Gen 3 x4
USB 3.2 Gen 2 (10Gbps) Port 3 x Type-A USB 3.2 Gen 2 10Gbps
1 x Type-C USB 3.2 Gen 1 5Gbps
IR Sensor (QNAP RM-IR004)
HDMI Output Optional via a PCIe adapter
Form Factor Tower
LED Indicators Status/Power, USB, LAN, Drive 1-8, M.2 SSD 1-2
Buttons Power, Reset, USB Auto Copy
Dimensions (HxWxD) 7.41 × 7.85 × 11.06 inch
Weight (Net) 11.09 lbs
Weight (Gross) 13.32 lbs
Operating temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 250W, 100-240V AC, 50-60Hz, 3.5A
Power Consumption: HDD Sleep Mode 19.576 W
Power Consumption: Operating Mode, Typical 29.792 W

Tested with drives fully populated.

Fan System fan: 1 x 120mm
CPU fan: 1 x 60mm
Sound Level 21.4 db(A)
System Warning Buzzer
Kensington Security Slot
Max. Number of Concurrent Connections (CIFS) - with Max. Memory 2000

Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications. Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting. * Sound Level Test Environment: Refer to ISO 7779; Maximum HDD loaded; Bystander Position; Average data from 1 meter in front of operating NAS. Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site. Designs and specifications are subject to change without notice.

QM2 - Upgrade your QNAP NAS Experience with M.2 SSD Caching and 10G in One Card

QM2 is designed specifically to upgrade your entry and mid-end QNAP NAS system! QNAP puts 2 M.2 SSD slots (SATA or PCIe NVMe) and one 10GBase-T network port into a single PCIe expansion card. Installed M.2 SSD sticks are covered by a giant heatsink as well as a smart fan for heat dissipation which ensure operational stability and longevity. With this PCIe expansion card, you can enable SSD Caching or auto tiering while populate all your NAS bays with high capacity HDD!

Application for QM2 SSD slots:

  1. Create a volume on these SSD and use them as extra storage
  2. Enable Read Cache
  3. Enable Read/Write Cache
  4. Enable Qtier feature
  5. Boost performance in case of memory swapping

What is Qbit?

Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.

Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.

Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.