You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP TS-332X 2G 3 Bay Diskless NAS, AnnapurnaLabs Alpine AL-324 Quad-core 1.7GHz ARM® Cortex-A57 Processor, 64-bit, 2 GB DDR4 2400 (1 x 2 GB) memory, 3 x M.2 2280 SATA 6 Gbps SSD, Built in 10GbE SFP+
Budget-friendly 10GbE NAS: A 3-bay NAS with three M.2 SSD slots, supporting RAID 5 for balancing capacity, performance, and protection.
30% of QNAP users choose RAID 5 arrays for their NAS to provide higher data protection, better system performance and optimized storage utilization. The 3-bay TS-332X not only allows you to build a RAID 5 array on your NAS with the fewest disks, but also features a 10GbE SFP+ port and three M.2 SATA 6Gb/s SSD slots to enable higher performance for tackling performance-demanding operations. Featuring a minimalist design, the affordable 10GbE-ready TS-332X can easily fit your commercial space.
|Build a secure RAID 5 array with three disks for optimized storage capacity and protection against one disk failing.||One built-in 10GbE SFP+ port for accelerating massive file sharing and intensive data transfer.||Qtier™ technology and SSD caching enable 24/7 optimized storage efficiency.|
|Snapshots fully record system status and data, allowing you to protect files and data from accidental deletion and malware attacks.||Supports LXC and Docker® containers for rapidly deploying application services across platforms including the cloud, servers, and PCs.||Secure private cloud supporting centralized storage, backup, sharing, and disaster recovery; a scalable storage solution.|
|CPU||AnnapurnaLabs, an Amazon company Alpine AL-324 Quad-core 1.7GHz ARM® Cortex-A57 Processor, 64-bit|
|System Memory||2 GB DDR4 2400 (1 x 2 GB)|
|Maximum Memory||16 GB (1 x 16 GB)|
|Memory Slot||1 x SODIMM slot|
|Flash Memory||512 MB NAND Flash|
|Drive Bay||Hot-swappable 3 x 3.5"/2.5" SATA 6Gb/s HDD/SSDs (2.5" tray base for installing 2.5" HDD/SSD can be purchased from QNAP Online Shop)|
|M.2 SSD Slot||3 x M.2 2280 SATA 6 Gbps SSD
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
|10 Gigabit Ethernet Port||1 x 10GbE SFP+|
|Gigabit Ethernet Port||2 x Gigabit RJ45|
|USB Port||USB 3.0 (Front: 1; Rear: 2)|
|Audio||1 x Built-in speaker
1 x 3.5mm line out jack
Note: You cannot use the speakers and the line-out jack simultaneously.
|LED Indicators||Status/Power, LAN, USB, HDD 1-3, M.2 SSD 1-3|
|Buttons||Power, Reset, USB One-touch-copy|
|System Warning||Buzzer or Smart voice prompt|
|Dimensions (H x W x D)||142 x 150 x 260.1 mm
5.59 x 5.9 x 10.24 inch
|Power Consumption (W)||HDD standby: 18.56 W
In operation: 26.22 W
(with 3 x HDDs and 3 x M.2 SSDs)
M.2 SSD: RBU-SNS8152S3256GG2 256G
|Sound Level||Sound pressure (LpAm): 20.4 dB(A)|
|Weight||Net weight: 1.64 kg (3.62 lbs)
Gross Weight: 2.69 kg (5.93 lbs)
|Operating Temperature & Relative Humidity||0 ~ 40˚C (32˚F ~ 104˚F)
5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
|Security Slot||Kensington security slot|
|Fan||1 x 14cm smart fan (12V DC)|
|Power Supply Unit||90W AC external adapter, 100-240V|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.