You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
The TS-2888X AI-Ready NAS is designed to optimize AI workflows, providing a hands-on, ready-to-use software environment to reduce time and complexity for implementation and management. Besides the exclusive QuAI – an AI developer package to quickly build, train and optimize AI models running on the NAS – QNAP's Container Station enables a range of open-source tools and frameworks for the AI workflows readily available to you. Being an all-in-one AI solution, the TS-2888X greatly simplifies the implementation of AI alongside providing greater cost-efficiency.
The TS-2888X utilizes a hybrid architecture with high-capacity HDDs and high-performance SSDs to meet your simultaneous needs for scale and performance. It supports up to 4 graphics cards to deliver tremendous computing power for accelerating AI machine learning. By integrating ready-to-use AI software with GPU-powered storage, the TS-2888X provides low latency, performs high-speed data transfer, and effectively reduces performance bottlenecks.
The TS-2888X is backed by a 3-year warranty at no extra cost. If needed, you can purchase a warranty extension that increases your coverage up to 5 years.
|CPU||Intel® Xeon® W-2175 14-core 2.5 GHz Processor (burst up to 4.3 GHz)|
|CPU Architecture||64-bit x86|
|Floating Point Unit|
|System Memory||512 GB LRDIMM DDR4 ECC (8 x 64GB)|
|Maximum Memory||512 GB (8 x 64GB)|
|Memory Slot||8 x R-DIMM/LR-DIMM DDR4
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with unbuffer DIMM (UDIMM) memory.
|Flash Memory||4GB (Dual boot OS protection)|
|Drive Bay||8 x 3.5-inch + 20 x 2.5-inch|
|Drive Compatibility||3.5-inch bays:
3.5-inch SATA 6Gb/s, 3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s hard disk drives
2.5-inch SATA 6Gb/s, 3Gb/s solid state drives
U.2 slot: 2.5-inch U.2 NVMe Gen3 x4/x2 solid state drives
SATA slot: 2.5-inch SATA 6Gb/s, 3Gb/s solid state drives
|SSD Cache Acceleration Support|
|Gigabit Ethernet Port (RJ45)||4|
|10 Gigabit Ethernet Port||2 x 10GBASE-T|
Slot 1: PCIe Gen 3 x8 or x4 (CPU)
Slot 2: PCIe Gen 3 x4 (CPU)
Slot 3: PCIe Gen 3 x8 or x4 (CPU)
Slot 4: PCIe Gen 3 x4 (CPU)
Slot 5: PCIe Gen 3 x8 or x4 (CPU)
Slot 6: PCIe Gen 3 x4 (CPU)
Slot 7: PCIe Gen 3 x4 (PCH)
Slot 8: PCIe Gen 3 x4 (PCH)
Slot 1, 3, 5 provides the width of PCIe Gen.3 x8 when slot 2, 4, 6 is not in use. Slot 1, 3, 5 then provides the width of PCIe Gen.3 x4 only when an expansion board is installed in slot 2, 4, 6.
|USB 2.0 port||4|
|USB 3.0 port||6|
|Audio Input||2 x 3.5mm dynamic microphone input jacks|
|Audio Output||1 x built-in speaker, 1 x 3.5mm line out jack (for ampfliers or speakers)|
|LED Indicators||3.5-inch HDD, 2.5-inch SSD, 2.5" U.2 SSD, Status, LAN, USB port status|
|LCD Display/ Button|
|Buttons||Power, Reset, USB Copy|
|Dimensions (HxWxD)||24.09 × 14.72 × 17.64 inch|
|Weight (Net)||58.86 lbs|
|Weight (Gross)||69.36 lbs|
|Operating temperature||0 - 40 °C (32°F - 104°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||2000W PSU, 200-240Vac,
|Power Consumption: Operating Mode, Typical||221.1 W|
|Fan||1 x 9 cm fan (12V DC)
9 x 12 cm fan (12V DC)
|Sound Level||33.6 db(A)|
|System Warning||Voice prompts or Buzzer|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.