$15,499.00

QNAP TDS-h2489FU-4314-256GB-US - NVMe all-flash ZFS storage, featuring the innovative dual Intel Xeon Silver 4314 16-core/32-thread processor, up to 3.4 GHz 64-and 256 GB RDIMM DDR4 ECC (8 x 32 GB), 32 x RDIMM DDR4 ECC (16 x slots per socket) supported with 24 U.2 NVMe Gen 4 x4 SSD bays, the QNAP’s flagship NVMe all-flash storage TDS-h2489FU delivers high random read/write IOPS for tackling I/O-intensive and latency-sensitive applications. (Supports QuTS hero or QTS operating system) the TDS-h2489FU meets your requirements for modern data centers, virtualization, and mission-critical backup/restore tasks.

Product Features

  • System: NVMe all-flash ZFS storage (Supports QuTS hero or QTS operating system)
  • Processor: Dual Intel® Xeon® Silver 4314 16-core/32-thread processor, up to 3.4 GHz
  • Connectivity Ports: 4 (2.5G/1G/100M/10M) - 2 x 25GbE SFP28 SmartNIC port
  • 10 Gigabit Ethernet Port: 2 x 10GBASE-T (10G/1G)
  • M.2 SSD Slot: 2 x M.2 2280 NVMe PCIe Gen 3 x2 or SATA 6Gb/s
  • Drive Bay: 24 x 2.5-inch U.2 & U.3 SSD
  • Model: Diskless (No drives)

Availability: Available
Sku: TDS-h2489FU-4314-256G
[additional]

TDS-h2489FU-4314-256G

CPU 2 x Intel® Xeon® Silver 4314 16-core/32-thread processor, up to 3.4 GHz
CPU Architecture 64-bit x86
Encryption Engine  (AES-NI)
System Memory 256 GB RDIMM DDR4 ECC (8 x 32 GB)
Memory Slot 32 x RDIMM DDR4 ECC (16 x slots per socket)
Flash Memory 5GB (Dual boot OS protection)
Drive Bay 24 x 2.5-inch
The system is shipped without SSD.
For the SSD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility 2.5-inch bays:
2.5-inch SATA hard disk drives (#17-24)
2.5-inch SATA solid state drives (#17-24)
2.5-inch U.2 NVMe PCIe Gen4 x4 solid state drives
Hot-swappable
M.2 Slot 2
Slot 1: M.2 2280 NVMe PCIe Gen 3 x4 or SATA 6Gb/s
Slot 2: M.2 2280 NVMe PCIe Gen 3 x2 or SATA 6Gb/s
SSD Cache Acceleration Support
SR-IOV
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 4 (2.5G/1G/100M/10M)
25 Gigabit Ethernet Port 2 x 25GbE SFP28 SmartNIC port
Wake on LAN (WOL)
Only the 2.5GbE port
Jumbo Frame
PCIe Slot 2
Slot 1: PCIe Gen4 x16
Slot 2: PCIe Gen4 x8
*Slot 2 is preinstalled with a 25GbE network adapter.
**Slot 1 provides the width of PCIe Gen4 x16 when Slot 2 is not in use, and provides the width of PCIe Gen4 x8 when Slot 2 is in use.
USB 3.2 Gen 1 port 4
Form Factor Rackmount
LED Indicators SSD, Status, Power, Fan, Temperaure, Power Module Status, Device Name, IP Address
Buttons Power, Reset, OLED
Dimensions (HxWxD) 3.48 × 17.57 × 28.08 inch
Weight (Net) 46.98 lbs
Weight (Gross) 60.85 lbs
Operating Temperature 0 - 35°C (32°F - 95°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 1200W PSU(x2), 100-240Vac
Max Wattage:
1200W@200-240Vac
1000W@100-127Vac
Power Consumption: Operating Mode, Typical 467.59 W
Tested with drives fully populated.
Fan 6 x 60mm, 12VDC
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS) - with Max. Memory 10,000

TDS-h2489FU-4314-256G

CPU 2 x Intel® Xeon® Silver 4314 16-core/32-thread processor, up to 3.4 GHz
CPU Architecture 64-bit x86
Encryption Engine  (AES-NI)
System Memory 256 GB RDIMM DDR4 ECC (8 x 32 GB)
Memory Slot 32 x RDIMM DDR4 ECC (16 x slots per socket)
Flash Memory 5GB (Dual boot OS protection)
Drive Bay 24 x 2.5-inch
The system is shipped without SSD.
For the SSD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility 2.5-inch bays:
2.5-inch SATA hard disk drives (#17-24)
2.5-inch SATA solid state drives (#17-24)
2.5-inch U.2 NVMe PCIe Gen4 x4 solid state drives
Hot-swappable
M.2 Slot 2
Slot 1: M.2 2280 NVMe PCIe Gen 3 x4 or SATA 6Gb/s
Slot 2: M.2 2280 NVMe PCIe Gen 3 x2 or SATA 6Gb/s
SSD Cache Acceleration Support
SR-IOV
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 4 (2.5G/1G/100M/10M)
25 Gigabit Ethernet Port 2 x 25GbE SFP28 SmartNIC port
Wake on LAN (WOL)
Only the 2.5GbE port
Jumbo Frame
PCIe Slot 2
Slot 1: PCIe Gen4 x16
Slot 2: PCIe Gen4 x8
*Slot 2 is preinstalled with a 25GbE network adapter.
**Slot 1 provides the width of PCIe Gen4 x16 when Slot 2 is not in use, and provides the width of PCIe Gen4 x8 when Slot 2 is in use.
USB 3.2 Gen 1 port 4
Form Factor Rackmount
LED Indicators SSD, Status, Power, Fan, Temperaure, Power Module Status, Device Name, IP Address
Buttons Power, Reset, OLED
Dimensions (HxWxD) 3.48 × 17.57 × 28.08 inch
Weight (Net) 46.98 lbs
Weight (Gross) 60.85 lbs
Operating Temperature 0 - 35°C (32°F - 95°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 1200W PSU(x2), 100-240Vac
Max Wattage:
1200W@200-240Vac
1000W@100-127Vac
Power Consumption: Operating Mode, Typical 467.59 W
Tested with drives fully populated.
Fan 6 x 60mm, 12VDC
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS) - with Max. Memory 10,000

QM2 - Upgrade your QNAP NAS Experience with M.2 SSD Caching and 10G in One Card

QM2 is designed specifically to upgrade your entry and mid-end QNAP NAS system! QNAP puts 2 M.2 SSD slots (SATA or PCIe NVMe) and one 10GBase-T network port into a single PCIe expansion card. Installed M.2 SSD sticks are covered by a giant heatsink as well as a smart fan for heat dissipation which ensure operational stability and longevity. With this PCIe expansion card, you can enable SSD Caching or auto tiering while populate all your NAS bays with high capacity HDD!

Application for QM2 SSD slots:

  1. Create a volume on these SSD and use them as extra storage
  2. Enable Read Cache
  3. Enable Read/Write Cache
  4. Enable Qtier feature
  5. Boost performance in case of memory swapping

What is Qbit?

Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.

Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.

Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.