You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
Expected availability: no current ETA
IMPORTANT NOTICE:
This item is noncancelable and nonreturnable.
QNAP TDS-16489U-SF2-R2 Diskless, QNAP 16-bay Dual Processor NAS and iSCSI/ IP-SAN. 3U, SAS 12G, SAS/SATA 6G, 2 x 1GbE, 4 x 10GbE (SFP+), 40GbE-ready, Redundant PSU. 4 additional 2.5" drive tray for cache/storage. Dual Intel Xeon E5-2630 v4 2.2GHz 10 Core Processors, 128GB DDR4 RDIMM (up to 1TB), PCIe expansion slot x4, redundant power supply, Without Rail Kit.
Integrating an application server and storage server into one system, the next-generation TDS-16489U R2 also provides you with the option of using either QES (an enterprise-grade OS that provides efficient and reliable storage for mission-critical tasks) or QTS (a feature-rich OS for storage and diverse application servers). Whether being used as a file server, virtualization server, VDI, medium-sized data center, video streaming, surveillance storage, and efficient file backup & recovery, the flexible TDS-16489U R2 with dual CPU and dual OS options is your ideal solution.
TDS-16489U-SF2-R2 | |
---|---|
CPU | E5-2630 v4 10-core 2.2 GHz processor x2
*Available with customization requirement
|
CPU Architecture | 64-bit x86 |
Floating Point Unit | |
Encryption Engine | (AES-NI) |
System Memory | 128GB RDIMM DDR4 (8 x 16GB) |
Maximum Memory | RDIMM/LRDIMM: 1 TB (16 x 64 GB) |
Memory Slot | 16 x Long-DIMM DDR4
You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
For the memory installation guidelines, see chapter 5 of the TDS-16489U User Guide. |
Flash Memory | 4GB (DOM for dual OS) |
Drive Bay | Front: 16 x 3.5-inch Rear: 4 x 2.5-inch |
Drive Compatibility | 3.5-inch bays: 3.5-inch SATA/SAS hard disk drives 2.5-inch SATA/SAS hard disk drives 2.5-inch SATA/SAS solid state drives 2.5-inch bays: 2.5-inch SATA/SAS solid state drives |
Hot-swappable | |
Gigabit Ethernet Port (RJ45) | 2
For a list of compatible network adapters, please visit the Compatibility List.
For instructions on how to install network adapters, please refer to Chapter 6 of the QNAP NAS Hardware Manual. |
10 Gigabit Ethernet Port | 4 x 10GbE SFP+ |
Jumbo Frame | |
PCIe Slot | 4 (3 x PCIe Gen3 x8, 1 x PCIE Gen3 x16) |
USB 3.0 port | 4 |
IPMI | 1 |
Form Factor | 3U Rack Mount |
LED Indicators | HDD 1-16, Status, 10 GbE, LAN, storage expansion port status |
Buttons | Power, Reset |
Dimensions (HxWxD) | 130.8 × 444 × 744 mm |
Weight (Net) | 22.42 kg |
Weight (Gross) | 30.19 kg |
Operating temperature | 0 - 40 °C (32°F - 104°F) |
Relative Humidity | 5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | Redundant/ Hot Swap ATX Power Supply,Input: 50-60 Hz 100-127V~/ 8.5A 200-240V/ 4.2A Output: 650W |
Power Consumption: HDD Sleep Mode | 254.21 W |
Power Consumption: Operating Mode, Typical | 362.86 W |
Fan | 4 x 6cm smart cooling fan (12V DC) |
Sound Level | 37.8 db(A) |
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.