You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP REXP-1220U-RP 12G RAID Expansion Enclosure, 2U, Redundant PSU, 1 x 12G SAS Cable.
|Host Interface||Three SAS 12Gbps 4x wide port|
|Hard Drive||12x 3.5" SAS/SATA 12/6Gb/s, SAS/SATA 3Gb/s hard drive or 2.5" SAS/SATA SSD|
|LED Indicators||Front panel: Status, fault, system over heat, fan error
Rear panel: SAS link, SAS error, enclosure ID
|Form Factor||2U rackmount|
|Dimensions (DxWxH) mm||88 (H) x 439 (W) x 520(D) mm
3.46 (H) x 17.28 (W)x 20.47 (D) inch
|Weight||Net weight (NAS only): 14.8 kg/ 32.63 lb
Gross weight (with packing and accessories):21.99 kg/ 48.48 lb
|Sound Level*||Sound pressure (LpAm): 46.1 dB(A)|
|Humidity||5~95% RH non-condensing, wet bulb: 27˚C|
|Power Consumption: In Operation||162.47W|
|Power Supply||Redundant/ Hot Swap ATX Power Supply, 400W, 90-264Vac~, 47-63Hz|
|Fan||3 x 6 cm smart cooling fan (hot-swappable fan module)|
|1.||Hard Drive Tray|
|2.||Hard Drive LEDs|
|5.||LED Indicators: System status, system fault, system over heat, fan error|
|1.||COM Port (Reserved)|
|2.||Mini SAS Port (8644)|
|3.||Mini SAS Port (8644)|
|4.||Mini SAS Port (8644)|
The REXP-1220U-RP/REXP-1620U-RP complies with ANSI/EIA-RS-310-D rack mounting standards. Before purchasing the server racks for this model, please make sure the server racks conform to the following criteria:
1. Rack size
2. The optional rack kits for the REXP-1220U-RP/REXP-1620U-RP are only compatible with square-hole server racks.
* Testing Environment:
Refer to ISO 7779 ; Maximum HDD loaded ; Bystander Position ; Average data from 1 meter in front of operating NAS
QNAP Flexible Volume Architecture
Intelligent Storage Manager
The QTS Storage Manager neatly presents tools and options for managing system storage with an intuitive graphical interface. From reviewing the system storage allocation in the Dashboard, to managing volumes, Storage Pools, disks and iSCSI storage, the Storage Manager provides a centralized place to ease the work of storage management.
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.