You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP ES1686dc-2123IT-64G 16-Bay Enterprise ZFS NAS, SAS 12G/6G, Intel® Xeon® D-2123IT 4-core 2.20 GHz processor (burst up to 3.0 GHz) per controller, 32GB RDIMM DDR4 ECC (4x 8 GB) per controller, 14-LAN (4 SFP+ / 3 RJ45 for Each Controller), Gen3 x 4 2280 10G-ready, iSCSI, Storage pool with RAID 0, 1, 5, 6, 10, 50, 60, RAID TP, triple Mirror, max 512GB RAM, PCIe expansion slot x 2, redundant power supply.
Delivering enterprise high availability, the ES1686dc Enterprise ZFS NAS features Intel® Xeon® D processors, dual active controllers, up to 512 GB DDR4 ECC memory, SAS 12Gb/s, and ZFS that supports logical volume management. The ES1686dc runs the latest QES 2.1.0 operating system that supports near-limitless snapshots, SnapSync, block-level data deduplication, and inline data compression. Whether being used as a mission-critical file server, virtualization server, VDI, medium-sized data center, video streaming, surveillance storage, and efficient file backup & recovery, the ES1686dc helps your business to achieve service-level agreements for performance and uptime.
|CPU||Intel® Xeon® D-2123IT 4-core 2.20 GHz processor (burst up to 3.0 GHz) per controller|
|CPU Architecture||64-bit x86|
|Floating Point Unit|
|System Memory||32 GB RDIMM DDR4 ECC (4x 8 GB) per controller|
|Maximum Memory||512 GB (8 x 64GB)|
|Memory Slot||8 x DDR4 RDIMM/LRDIMM
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
|Flash Memory||4GB (Dual boot OS protection)|
|Drive Bay||16 x 3.5-inch
SAS 12Gb/s, backward-compatible to SAS 6Gb/s
|Drive Compatibility||3.5-inch bays:
3.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA hard disk drives
2.5-inch SAS/SATA solid state drives
|SSD Cache Acceleration Support|
|Cache for Copy To Flash (C2F)||1 per each controller (64GB)|
|Gigabit Ethernet Port (RJ45)||3 for each controller (one for remote management)|
|10 Gigabit Ethernet Port||4 x 10G SFP+ for each controller|
Slot 1: PCIe Gen3 x8 (CPU)
Slot 2: PCIe Gen3 x8 (CPU)
|USB 3.0 port||2 per each controller|
|Form Factor||3U Rack Mount|
|LED Indicators||System Power LED (Green): on/off
System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged
LCD Status Display (Two-digit number): Status of JBOD connection
|Dimensions (HxWxD)||132 × 483.05 × 630.62 mm|
|Weight (Net)||25.83 kg|
|Weight (Gross)||32.69 kg|
|Operating temperature||0 - 40 °C (32°F - 104°F)|
|Relative Humidity||5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||Redundant/ Hot Swap Power Vin:90~264VAC;770W|
|Power Consumption: Operating Mode, Typical||500.87 W|
|Fan||Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)|
|Sound Level||55.8 db(A)|
|Safety Standard||FCC Class A (USA only)
CE Mark ( EN55022 Class A, EN55024)
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.