Micron 256GB 1100 3D NAND Client SATA SSD
Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and up to four channels of Micron NAND Flash internally. Available in both M.2 and 2.5-inch form factors, the SSD integrates easily in existing storage infrastructures.
The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption and extended reliability.
The self-encrypting drive (SED) features a FIPS-compliant, AES-256 encryption engine, providing hardware-based, secure data encryption, with no loss of SSD performance. This SED follows the TCG/Opal specification for trusted peripherals.
When TCG/Opal features are not enabled, the device can perform alternate data encryption by invoking the ATA security command set encryption features, to provide fulldisk encryption (FDE) managed in the host system BIOS. TCG/Opal and ATA security feature sets cannot be enabled simultaneously.
The data encryption is always running; however, encryption keys are not managed and the data is not secure until either TCG/Opal or ATA security feature sets are enabled.
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.
