You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
Seagate Exos X14 ST10000NM0478 - Hard drive - 10 TB - internal - 3.5" - SATA 6Gb/s - 7200 rpm - buffer: 256 MB
Formerly Enterprise Capacity 3.5 HDD (Helium) - Perfect for Hyperscale and Traditional Data Center.
General | |
---|---|
Buffer Size | 256 MB |
Bytes per Sector | 4096 |
Capacity | 10 TB |
Depth | 5.8 in |
Device Type | Hard drive - internal |
Features | PowerChoice, T10 Protection Information (T10 PI), Low Halogen, Super Parity, Hot-Plug Support, PowerBalance, Organic Solderability Preservative, Helium Sealed-Drive Design |
Form Factor | 3.5" |
Height | 1 in |
Interface | SATA 6Gb/s |
Weight | 24.34 oz |
Width | 4 in |
Environmental Parameters | |
---|---|
Max Operating Temperature | 140 °F |
Min Operating Temperature | 41 °F |
Shock Tolerance (non-operating) | 250 g @ 2 ms |
Shock Tolerance (operating) | 40 g @ 2 ms |
Vibration Tolerance (non-operating) | 2.27 g @ 2-500 Hz |
Expansion & Connectivity | |
---|---|
Compatible Bay | 3.5" |
Interfaces | 1 x SATA 6 Gb/s |
Manufacturer Warranty | |
---|---|
Service & Support | Limited warranty - 5 years |
Performance | |
---|---|
Average Latency | 4.16 ms |
Drive Transfer Rate | 600 MBps (external) |
Internal Data Rate | 249 MBps |
Spindle Speed | 7200 rpm |
Power | |
---|---|
Power Consumption | 5 Watt (idle) ¦ 10 Watt (maximum) ¦ 6 Watt (random read/write) |
Reliability | |
---|---|
MTBF | 2,500,000 hours |
Non-Recoverable Errors | 1 per 10^15 |
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.