You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
TS‑h1090FU‑7302P‑128G‑1264MMAX - 76TB all Flash integrated with high performance 12 x Micron 7400 MAX 6400GB NVMe U.3 (7mm) Non-SED Enterprise NVMe SSD's ready to use out of the box.
|CPU||AMD EPYC™ 7302P 16-core/32-thread processor, up to 3.3 GHz|
|CPU Architecture||64-bit x86|
|System Memory||128 GB RDIMM DDR4 ECC (8 x 16 GB)|
|Maximum Memory||1 TB+ (12 x 128 GB)|
|Memory Slot||12 x RDIMM DDR4|
|Flash Memory||5GB (Dual boot OS protection)|
|Drive Bay||10 x 2.5-inch U.2 PCIe NVMe / SATA 6Gbps
The system is shipped without SSD.
For the SSD compatibility list, please visit https://www.qnap.com/compatibility/
|Drive Compatibility||2.5-inch U.2 NVMe Gen 4 x4 solid state drives
2.5-inch SATA solid state drives
|SSD Cache Acceleration Support|
|2.5 Gigabit Ethernet Port (2.5G/1G/100M)||2 (2.5G/1G/100M/10M)|
|25 Gigabit Ethernet Port||2 x 25GbE SFP28 SmartNIC port|
|Wake on LAN (WOL)||
Only the 2.5GbE port
Slot 1: PCIe Gen4 x16
Slot 2: PCIe Gen4 x16
For low profile PCIe cards only.
|USB 3.2 Gen 1 port||3|
|LED Indicators||Disk, Status, LAN, storage expansion port status|
|Dimensions (HxWxD)||1.73 × 16.93 × 22.83 inch|
|Weight (Net)||22.84 lbs|
|Weight (Gross)||29.56 lbs|
|Operating Temperature||0 - 40 °C (32°F - 104°F)|
|Storage Temperature||-20 - 70°C (-4°F - 158°F)|
|Relative Humidity||5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Power Supply Unit||550W PSU (x2), AC 100-240 V|
|Power Consumption: Operating Mode, Typical||157.97 W
Tested with drives fully populated.
|Fan||5 x 60mm, 12VDC|
|Max. Number of Concurrent Connections (CIFS) - with Max. Memory||10,000|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.