You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP TVS-672N-i3-8G Diskless SPECIAL MEMORY UPGRADE, Intel® Core™ i3-8100T 4-core 3.1 GHz Processor, 8 GB SODIMM DDR4 (2 x 4 GB) (max 32GB), 6x 2.5"/3.5" SATA HDD/SSD + 2x M.2 PCIe SSD slot, 2xGbE LAN, 1 x 10GBase-T, 4x USB 3.1 Gen 2 type-C & type-A, USB. 3.0, LCD, 2x PCIe expansion slot, 250W single power supply, 1x MIC In, 1x Line Out
Powered by an 8th generation Intel® Core™ i3 processor, the high-performance TVS-672N NAS features 5GBASE-T high bandwidth, which delivers up to five times the speed of regular Gigabit Ethernet and allows for smoother 4K video transfer, display, and editing. With M.2 SSD support to enable SSD caching coupled with the HybridMount cloud storage gateway, the TVS-672N provides a hybrid cloud storage solution for you to leverage cloud spaces as local storage and access the cloud with lower latency. The TVS-672N is driven by high-quality hardware that delivers optimum performance, comprehensive multimedia features, expandable storage capacity, and numerous other NAS functions for more creativity and greater accomplishments.
TVS-672N-i3-8G | |
---|---|
CPU | Intel® Core™ i3-8100T 4-core 3.1 GHz Processor |
CPU Architecture | 64-bit x86 |
Graphic Processors | Intel® UHD Graphics 630 |
Floating Point Unit | |
Encryption Engine | (AES-NI) |
Hardware-accelerated Transcoding | |
System Memory | 8 GB SODIMM DDR4 (2 x 4 GB) |
Maximum Memory | 32 GB ( 2 x 16 GB) |
Memory Slot | 2 x SO-DIMM DDR4 |
Flash Memory | 5GB (Dual boot OS protection) |
Drive Bay | 6 x 3.5-inch SATA 6Gb/s, 3Gb/s |
Drive Compatibility | 3.5-inch bays: 3.5-inch SATA hard disk drives 2.5-inch SATA hard disk drives 2.5-inch SATA solid state drives |
Hot-swappable | |
M.2 SSD Slot | 2 x M.2 2280 PCIe Gen3 x2 slots |
SSD Cache Acceleration Support | |
Gigabit Ethernet Port (RJ45) | 2 |
10 Gigabit/ 5 Gigabit Ethernet Port | 1 x 5GbE(5G/2.5G/1G/100M Multi-gigabit) |
Jumbo Frame | |
PCIe Slot | 2 Slot 1: PCIe Gen 3 x16 (CPU) Slot 2: PCIe Gen 3 x4 (PCH) |
USB 3.0 port | 1 |
USB 3.1 Gen 2 (10Gbps) Port | 2 x Type-C USB 3.1 Gen2 5V/3A 10Gbps 2 x Type-A USB 3.1 Gen2 5V/1A 10Gbps |
IR Sensor | (QNAP RM-IR004 & MCE) |
HDMI Output | 1, HDMI 2.0 (up to 3840 x 2160 @ 60Hz) |
Audio Input | 1 x 3.5mm microphone input jacks |
Audio Output | 1 x built-in speaker, 1 x 3.5mm line out jack (for ampfliers or speakers) |
Form Factor | Tower |
LED Indicators | HDD 1-8, Status, LAN, USB port, M.2 port |
LCD Display/ Button | |
Buttons | Power, Reset, USB Copy |
Dimensions (HxWxD) | 7.41 × 10.41 × 11.01 inch |
Weight (Net) | 14.45 lbs |
Weight (Gross) | 17.79 lbs |
Operating temperature | 0 - 40 °C (32°F - 104°F) |
Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | 250W, 100-240V |
Power Consumption: HDD Sleep Mode | 26.52 W |
Power Consumption: Operating Mode, Typical | 45.6 W
With WD10EFRX drives fully populated
|
Fan | System: 2 x 12cm fan (12V DC) CPU: 2 x 6cm blower fan |
Sound Level | 23.8 db(A) |
System Warning | Voice prompts or Buzzer |
Kensington Security Slot |
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.