TS‑h1090FU‑7302P‑128G‑1032MMAX - 32TB all Flash integrated with high performance 10 x Micron 7400 MAX 3200GB NVMe U.3 (7mm) Non-SED Enterprise NVMe SSD's ready to use out of the box.

Product Features

  • Processor:  AMD EPYC™ 7302P 16-core/32-thread processor, up to 3.3 GHz
  • System Memory: 128 GB RDIMM DDR4 ECC (8 x 16 GB)
  • Maximum Memory: 1 TB (8 x 128 GB)
  • 2.5 Gigabit Ethernet Port (2.5G/1G/100M): 2
  • 25 Gigabit Ethernet Port: 2 x 25GbE SFP28 SmartNIC port
  • Drive Compatibility: 2.5-inch U.2 NVMe Gen 3 x4 solid state drives
  • Drive Bay: 10 x 2.5-inch U.2/U.3 NVMe pre-installed with 10 x 3.2TB 7400MAX U.3 (32TB) Gross  Pre-tested RAID set and ready to use out of the BOX (Rails kits are optional)
Availability: Available
Sku: TS-h1090FU-7302P-128G-1032MMAX


CPU AMD EPYC™ 7302P 16-core/32-thread processor, up to 3.3 GHz
CPU Architecture 64-bit x86
Encryption Engine  (AES-NI)
System Memory 128 GB RDIMM DDR4 ECC (8 x 16 GB)
Maximum Memory 1 TB+ (12 x 128 GB)
Memory Slot 12 x RDIMM DDR4
Flash Memory 5GB (Dual boot OS protection)
Drive Bay 10 x 2.5-inch U.2 PCIe NVMe / SATA 6Gbps
The system is shipped without SSD.
For the SSD compatibility list, please visit https://www.qnap.com/compatibility/
Drive Compatibility 2.5-inch U.2 NVMe Gen 4 x4 solid state drives
2.5-inch SATA solid state drives
SSD Cache Acceleration Support
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 2 (2.5G/1G/100M/10M)
25 Gigabit Ethernet Port 2 x 25GbE SFP28 SmartNIC port
Wake on LAN (WOL)
Only the 2.5GbE port
Jumbo Frame
PCIe Slot 2
Slot 1: PCIe Gen4 x16
Slot 2: PCIe Gen4 x16
For low profile PCIe cards only.
USB 3.2 Gen 1 port 3
Form Factor Rackmount
LED Indicators Disk, Status, LAN, storage expansion port status
Buttons Power, Reset
Dimensions (HxWxD) 1.73 × 16.93 × 22.83 inch
Weight (Net) 22.84 lbs
Weight (Gross) 29.56 lbs
Operating Temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Power Supply Unit 550W PSU (x2), AC 100-240 V
Power Consumption: Operating Mode, Typical 157.97 W
Tested with drives fully populated.
Fan 5 x 60mm, 12VDC
System Warning Buzzer
Max. Number of Concurrent Connections (CIFS) - with Max. Memory 10,000
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.

QM2 - Upgrade your QNAP NAS Experience with M.2 SSD Caching and 10G in One Card

QM2 is designed specifically to upgrade your entry and mid-end QNAP NAS system! QNAP puts 2 M.2 SSD slots (SATA or PCIe NVMe) and one 10GBase-T network port into a single PCIe expansion card. Installed M.2 SSD sticks are covered by a giant heatsink as well as a smart fan for heat dissipation which ensure operational stability and longevity. With this PCIe expansion card, you can enable SSD Caching or auto tiering while populate all your NAS bays with high capacity HDD!

Application for QM2 SSD slots:

  1. Create a volume on these SSD and use them as extra storage
  2. Enable Read Cache
  3. Enable Read/Write Cache
  4. Enable Qtier feature
  5. Boost performance in case of memory swapping

What is Qbit?

Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.

Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.

Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.