You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP TS-351-4G Diskless, Intel Celeron J1800 2-core 2.41GHz, up to 2.58GHz, 4GB DDR3L SODIMM RAM (2 x 2GB, 2 DIMMS, max 8GB), 3 x 3.5"/ 2.5" SATA drive slots, 2 x M.2 2280 Gen2 (x1) NVMe PCIe slots, 1 x GbE LAN, USB 3.0/2.0, built-in spesker, HDMI
30% of QNAP users choose RAID 5 arrays for their NAS to provide higher data protection, better system performance and optimized storage utilization. The 3-bay TS-351 not only allows you to build a RAID 5 array on your NAS with the fewest disks, but also features M.2 SSD slots and efficient auto-tiered storage that realizes optimal system performance. The TS-351 is also a home entertainment portal for streaming and sharing photos, music, and videos throughout your home and beyond. Featuring a minimalist design, the TS-351 can easily fit your home space as a brilliant digital hub!
Build a secure RAID 5 array with three disks for optimized storage capacity and protection against one disk failing.
H.264 hardware decoding and real-time transcoding; Full HD 1080p HDMI output for direct multimedia playback.
Install SSDs for cache acceleration with the built-in M.2 PCIe (Gen2 x1, 5Gb/s) NVMe SSD slots.
Effortlessly centralize, organize, browse, and share your multimedia files.
Qtier™ technology and SSD caching enable 24/7-optimized storage efficiency.
Snapshots fully record system status and data, allowing you to protect files and data from accidental deletion and malware attacks.
|CPU||Intel Celeron J1800 dual core 2.41 GHz processor, up to 2.58 GHz|
|System Memory||4 GB DDR3L (2 x 2 GB)|
|Maximum Memory||8 GB (2 x 4 GB)|
|Memory Slot||2 x SODIMM slot|
|Flash Memory||512 MB NAND Flash|
|Drive Bay||Hot-swappable 3 x 3.5"/2.5" SATA HDDs/SSDs
1. HDD 1~2 supports SATA 3Gb/s, HDD 3 supports SATA 6Gb/s
2. 2.5-inch HDD/SSD drive tray bases can be purchased from QNAP Online Shop
|M.2 SSD Slot||2 x M.2 PCIe (Gen2 x1, 5Gbps) NVMe 2280 slots
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
|HDMI Output||1 x HDMI v1.4a|
|Gigabit Ethernet Port||1 x Gigabit RJ45|
|USB Port||1 x USB 3.0
2 x USB 2.0
|Audio||1 x Built-in speaker
1 x 3.5mm line out jack
Note: You cannot use the speakers and the line-out jack simultaneously.
|LED Indicators||Status/Power, LAN, USB, HDD 1-3, M.2 SSD 1-2|
|Buttons||Power, Reset, USB One-touch-copy|
|System Warning||Buzzer or Smart voice prompt|
|Dimensions (H x W x D)||142 x 150 x 260.1 mm
5.59 x 5.9 x 10.24 inch
|Power Consumption (W)||HDD standby: 13.21 W
In operation: 25.63 W
(with 3 x HDDs and 2 x M.2 SSDs)
M.2 SSD: INTEL SSDPEKKW12 128G
|Sound Level||Sound pressure (LpAm): 21.8 dB(A)|
|Weight||Net weight: 1.64 kg (3.62 lbs)
Gross Weight: 2.69 kg (5.93 lbs)
|Operating Temperature & Relative Humidity||0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C (80.6˚F)|
|Security Slot||Kensington security slot|
|Fan||1 x 9cm smart fan (12V DC)|
|Power Supply Unit||65W AC Adapter, 100-240V|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.