You have no items in your shopping cart.
Application for QM2 SSD slots:
- Create a volume on these SSD and use them as extra storage
- Enable Read Cache
- Enable Read/Write Cache
- Enable Qtier feature
- Boost performance in case of memory swapping
QNAP TES-3085U-D1548-32GR Diskless 18 Bay NAS Server, Intel Xeon Processor D-1548, 8-core 2.0 GHz, 32 GB ECC RAM ( 8 GB RDIMM x 4 ), 10GbE supported, 256GB mSATA cache module supported, VMware, Citrix and Hyper-V ready
Powered by an Intel® Xeon® D processor, the powerful enterprise-class TES-3085U is open for two operating systems – either the FreeBSD-based QES or Linux-based QTS. While QES supports ZFS for the utmost reliability and allows near-limitless snapshots, block-level data deduplication and real-time data compression, QTS features Qtier Technology, SSD cache, and an abundance of value-added apps to realize storage efficiency and diverse usage applications. The TES-3085U gives the flexibility to choose from two operating systems, enabling businesses to deploy proper operating systems on multiple TES-3085U based on their needs and goals in different stages. The TES-3085U is especially useful for providing a speedy all-flash storage solution that offers up to 24 disk bays and 6 dedicated SSDs bays for caching.
Note: To change the NAS operating system after completing setup, it is necessary to re-initialize the hard disks and delete all stored data. A remote backup is required before switching the NAS operating system.
|CPU||Intel® Xeon® Processor D-1548, 8-core 2.0 GHz|
|System Memory||Total DIMM slots: 4
Maximum memory: DDR4 128 GB ( 32 GB RDIMM x 4 )
Memory modules pre-installed:
TES-3085U-D1548-32GR: 32 GB ECC RAM ( 8 GB RDIMM x 4 )
Note: TES-3085U requires at least 32GB RAM for running QES operating system.
|Flash Memory||4 GB DOM|
|Drive Bay||Front: 2.5"x 24
Rear: 2.5" SSD slot x 6
|Drive Compatibility||Front: SAS 12Gb/s, SAS 6Gb/s, SATA 6Gb/s HDD and SSD
Rear: SATA 6Gb/s SSD
|USB Port||2 x USB 3.0 port (rear)
For QTS OS: The USB slots support pen drives and other USB-ready devices such as printers, UPS, etc.
For QES OS: The USB slots are only reserved for development and debugging.
|Gigabit Ethernet Port||2 x SFP+ 10GbE ports, 4 x Gigabit ports|
|LED Indicators||10 GbE, Status, LAN, Storage expansion port status|
|Buttons||System: Power button and reset button|
|Form Factor||2U, Rackmount|
|Dimensions (H x W x D)||88.3 x 439 x 484.5 mm
3.47 x 17.28 x 19.07 inch
|Weight||Net weight (NAS only): 14.15 kg
Gross weight (with packing and accessories): 22.27 kg
|Operating Temperature & Relative Humidity||0-40˚C, 5~95% non-condensing, wet bulb: 27˚C.|
|Power Consumption (W)||In Operation: 255.04W|
|Power Supply Unit||Redundant power: Input 90~264VAC; 450W x 2|
|PCIe Slot||Number: 4
Slot 1: PCIe Gen.3 x8
Slot 2: PCIe Gen.2 x4
Slot 3: PCIe Gen.3 x4
Slot 4: PCIe Gen.3 x4 or PCIe Gen.3 x8
Note: Slot 4 provides the width of PCIe Gen.3 x8 when slot 3 is not in use. Slot 4 then provides the width of PCIe Gen.3 x4 only when an expansion board is installed in slot 3.
|Fan||4 x 6 cm smart cooling fan|
Application for QM2 SSD slots:
Configured system orders start here!
The selected drives are batch controlled and tested using our HDD and SSD servers. Passed drives are then installed in the NAS with Volume and RAID set. Our pre-burn testing prepares the NAS with an initial system and drive testing cycle to ensure that the integrity of the entire system is tested and passed with no issues at all.
Our stress testing (burn-test) cycle commences for a minimum of 24 hours and extends to 48 hours if requested or required. This is undertaken in order to ensure stability when used in a normal environment. These tests can include extremes of workload (constant I/O's), CPU and memory use, thermal load (heat), clock speed, or voltages, bus and connectivity components, with the primary stress testing software aiming to test stability by trying to force a system to fail. Our tests put a greater emphasis on robustness, availability and error handling heavy loads.
Once the tests are complete we QA and pack the system back into it's retail box. Then it's double boxed to protect the unit during shipping. You receive your QNAP NAS Ready To Plug 'N' Store. It doesn't get any easier. Buy your NAS from the QNAP EXPERTS at QNAP DIRECT.